Zpooldegradedreplacedisk

2019年12月11日 — 1) Gather Information. GUID, Pool Name, and a Similarly Partitioned Disk; Serial Number; Installed Disks · 2) Remove the Failing Disk · 3) Format ...

2019年2月2日 — To replace a failed disk with a hot spare, you do not need to zpool replace at all (and in fact this might cause you all sorts of grief ...

2018年11月26日 — ZFS noticed that it had a missing disk, and was now in a DEGRADED state, but crucially, everything was still working and available. The next ...

2020年4月5日 — Shutdown the server. · Inspect each disk drive until you locate the faulty one by its serial number. · Unplug and remove the faulty disk. · Put the ...

2013年6月8日 — The short answer is that you can use the disks' GUIDs (which persist even after disconnecting a drive) with the zpool command. Long answer: I ...

The pool will be degraded with the offline disk in this mirrored configuration, but the pool will continue to be available. Physically replace the disk (c1t3d0) ...

2021年11月21日 — Drive Replacement. Replacing the drive was simple: Turn off NAS and open the case; The hard drive serial numbers face outwards so I could ...

Reconfigure the disk (c1t3d0). Bring the new disk (c1t3d0) online. Run the zpool replace command to replace the disk (c1t3d0). Note –. If you had previously ...

2023年2月15日 — Hi guys. I run PBS with ZFS on a pool named RPOOL that contains 4 drives of 4Tb. /dev/sdb was phasing out and gave tons of errors.